Short answer: yes, travertine works well in Australian homes, particularly outdoors around pools and alfresco areas, because it stays relatively cool and has a natural, timeless look. Its main drawbacks are that it’s softer than granite or bluestone, it’s porous and it needs sealing. With the right finish and a little care, it lasts for decades.
What is travertine?
Travertine is a type of limestone that forms around mineral springs. As the water evaporates, it leaves behind layers of stone with small natural holes. These give travertine its character, and they’re often filled during manufacturing for a smoother surface. Unfilled travertine has a more rustic, textured look that many people like outdoors.
Most travertine sold in Australia is imported, and it comes in several colours. Classic creams and beiges are the most common, but silver, walnut and ivory tones are also available, which makes it easier to match the stone to the rest of a home.
The pros
- Cool underfoot. Light colours reflect heat, which makes travertine comfortable for bare feet around pools, even on hot summer afternoons.
- Natural, timeless look. Its soft creams, beiges and silvers suit coastal, Mediterranean and classic styles.
- Indoor and outdoor use. It can run from an inside living area to an outside terrace for a seamless look.
- Each piece is unique. No two tiles or pavers are exactly alike, so the finished surface has natural variation.
- Good grip when tumbled. A tumbled finish gives a textured surface that helps around wet areas.
The cons
- Softer stone. It can scratch or chip more easily than harder stones, particularly on driveways or where furniture is dragged.
- Porous. Unsealed travertine can absorb spills and stain.
- Acid-sensitive. Like all limestone, it can etch if exposed to acids such as vinegar, citrus or some cleaning products.
- Needs ongoing care. Sealing and regular cleaning are part of owning it.
Finishes explained
| Finish | Look and feel | Best for |
| Tumbled | Rounded edges, aged look, good grip | Pool surrounds, paths, rustic styles |
| Honed | Smooth, matt surface | Indoor floors, modern outdoor areas |
| Polished | Glossy, reflective | Indoor feature areas (not wet outdoor areas) |
| Brushed | Textured, soft sheen | Outdoor living areas |
The finish matters as much as the stone. A polished surface looks beautiful in an entry hall but can be slippery when wet, so it isn’t a good choice around a pool. For outdoor areas, tumbled or brushed finishes are usually the safest bet.
Where travertine works best in Australian homes
- Pool surrounds and coping. This is travertine’s most popular use. It stays cooler than darker stones and the tumbled finish gives good grip on wet feet.
- Alfresco and entertaining areas. A honed or brushed finish gives a smooth, clean surface for outdoor dining that still looks natural.
- Indoor floors. In living areas, kitchens and bathrooms, honed travertine gives a warm, soft look. It feels cool in summer, which suits warmer parts of the country.
- Walls and feature areas. Travertine cladding adds texture to fireplaces, feature walls and outdoor kitchens.
It’s less suited to driveways that take daily car traffic, unless thicker pavers are used on a solid base.
How to care for it
- Seal it after installation and reseal periodically, as the sealer manufacturer recommends. Outdoor areas exposed to sun and pool water may need resealing more often.
- Clean with pH-neutral products. Avoid acidic or harsh cleaners, which can dull the surface.
- Wipe spills quickly, especially wine, oil and citrus.
- Sweep regularly to stop grit scratching the surface.
- Rinse pool surrounds with fresh water from time to time to reduce chlorine or salt build-up.
A note on cutting stone
Natural stone contains crystalline silica, so cutting it creates dust that is hazardous to breathe. Safe Work Australia’s guidance on silica explains the controls installers must use, such as water suppression and respiratory protection. If you’re planning DIY cuts, read it first, or leave cutting to a qualified installer who has the right equipment.
Travertine compared with other popular stones
Compared with bluestone, travertine is lighter, cooler and softer. Bluestone is the better choice for driveways and heavy wear, while travertine wins around pools. Compared with porcelain tiles that imitate stone, travertine has genuine natural variation and can be honed or resealed if it wears, whereas a printed porcelain surface cannot be refinished. Compared with sandstone, travertine is usually denser and less prone to salt marks, though both benefit from sealing. Many homes use a mix: bluestone at the front, travertine around the pool and sandstone in the garden.
Questions to ask before you buy
- Is the stone filled or unfilled, and which suits the area I’m paving?
- What thickness do I need for this use?
- Which finish gives the grip I need near water?
- Is all my order from the same batch, so the colour is consistent?
- What sealer do you recommend, and how often should I reapply it?
Where to buy
If you’re in Victoria, you can see travertine from RMS Traders in person at its showrooms in Hoppers Crossing, Richmond and Geelong. Samples can be ordered too, so you can see the stone in your own light, wet and dry, before deciding.